Languages

Geogrids for Roads and Highways

geogrids for roads

Geogrids for roads and highways

Extend your pavement life by up to 300% with GlasGrid Reinforcement geogrids. GlasGrid can be used as full lane pavement reinforcement or isolated crack repair reinfocement. The use of GlasGrid can also reduce maintenance costs by helping to prevent the advancement of reflective cracking. GlasGrid works by reinforcing asphalt concrete overlays in pavement construction. Tests proves excellent milling performance and measured recyclability. 

 

 

Geogrids for leveling course

Geogrid GlasGrid GG
  • High-tensile and stiffness fiberglass grid due to consistent impregnation of each glass filament.
  • Patented polymer coating improving compatibility with bitumen. 
  • Quick and efficient installation due to self-adhesive backing .
  • Available tensile strength 50 kN/m, 100 kN/m, 200 kN/m
  • Available roll width 1,00 – 3,00 m.

Geogrid GlasGrid TF
  • High-tensile and stiffness fiberglass grid as regular GlasGrid.
  • Labour and time savings due to patented highly engineered Tack Film replacing tack coat.
  • Same easy to install self-adhesive as regular GlasGrid.
  • Available tensile strength 100 kN/m.
  • Available roll width 1,50 m.

Geogrids for milled surface

Geogrid GlasGrid CG
  • Composite material consisting of a high-tensile fiberglass grid and nonwoven fabric layer that is saturated with bitumen.
  • Non-woven fabric working as an effective moisture barrier  as well as additional pavement protection.
  • Light version CGL for optimum asphalt retention.
  • Available tensile strength 50 kN/m, 100 kN/m, 200 kN/m.
  • Available roll width 1,50 m for CG;  1,00 -  3,00  m for CGL. 

Geogrid GlasGrid GP
  • Constructed of high strength, continuous glass fibers, coated in a patented polymer and embedded between two spun bond polyester textiles.
  • Strong waterproofing membrane.
  • Lower level of asphalt binder required.
  • Available tensile strength 25 kN/m and 50 kN/m.
  • Various roll sizes available.

Geogrid GlasGrid PG
  • Fast and safe complete patch repair system for reinforcement of joint superstructures, single cracks and small areas. 
  • Rapid and easy manual installation due to self-adhesive bitumen layer.
  • Available tensile strength 100 kN/m.
  • Available roll width 0,6 and 1,2 m.
Provide Feedback