FAQ

Find answers to the most recurring questions based on ADFORS expertise and experience

4 Results

Filters (1) Close filters

Can I use FibaTape or FibaFuse on an inside corner?

Yes.  FibaTape can be used to tape inside corners. Just fold it with one hand and press it into the corner with the other. The tape is self-adhesive so it can be applied to all the inside corners before any joint compound is applied. Make sure the tape is tight into the corner without being slightly rounded. If it is rounded then it is not tight into the corner. So when a taping knife is used to apply and smooth the joint compound the taping knife could accidentally cut through the tape. FibaTape does make a special tool for placing the tape into the inside corners.  The dispenser type tool holds a roll of tape and actually rolls the tape tight into the corner and cuts it to the desired length. A must have tool for larger taping jobs.

FibaFuse is pre-creased for corners.  While you can use a taping knife, we suggest using a corner trowel for installation to prevent cutting the tape.

Does FibaTape meet ASTM Specifications?

Yes. FibaTape products meet the following ASTM standards: D-3775, C-474, D-17777, C-475 and D-3776. Other ASTM standards may be met with our specialty tape products.

How do you install FibaFuse MAX?

Embed the tape in ready-mix joint compound. Once dry, apply a second coat of compound wider than the first. Apply additional coats if needed. Sand with a fine grit sandpaper or sponge. Be sure to apply FibaFuse MAX with the color side down.

Where can I buy FibaFuse?

FibaFuse can be found at Home Depot, Lowes, Menards, Sherwin Williams, True Value, Ace, Do-it-Best and other local hardware stores throughout US and Canada. All products can also be found online for purchase. Click here to visit our Where to Buy page.

Need additional assistance?