Cement board or similar products are typically the substrate for tile which is often set in a thin-set type mortar. FibaTape Cement Board Tape is alkali-resistant and the only tape that should be used for cement applications with dry or thin-set mortar. This tape is made from the same vinyl-coated fabric that is embedded in the face of some cement boards to give the board added strength and crack resistance.
What type of compound should I use with FibaTape/FibaFuse?
Although FibaTape and FibaFuse products can be used with all types of compounds, we do have some recommendations for the best results.
When taping regular, tapered edge seams with Perfect Finish or Extra Strength tape we recommend heavy weight all-purpose ready-mixed compound for those that prefer all-purpose compounds. If the temperature is warm and stable and humidity is low you can also use the heavy weight compound with our other FibaTape products. FibaFuse works with all compounds but we also recommend heavy weight all-purpose if you prefer all-purpose compound. Taping and setting compounds are also great to use with our FibaTape and FibaFuse products. We suggest staying away from lightweight compounds when embedding any type of tape. Remember to always refer to the compound manufacturer’s instructions for recommended drying times.
How do you install FibaFuse MAX?
Embed the tape in ready-mix joint compound. Once dry, apply a second coat of compound wider than the first. Apply additional coats if needed. Sand with a fine grit sandpaper or sponge. Be sure to apply FibaFuse MAX with the color side down.
Pollen Guard is made from what type of material?
Pollen Guard is manufactured using polyester yarn
Where can I buy FibaLath?
FibaLath is available through special order at your local big box store and in select building distribution yards
What percentage of the sun does each Sun Guard product block?
Sun Guard 90 features a 40x40 weave and blocks up to 85%, while Sun Guard 85 features a 54x18 weave and blocks up to 75%
Is FibaLath alkali-resistant?
Yes, FibaLath is alkali-resistant.
Does the hybrid polyester/fiberglass input fibers have an adverse reaction together when exposed to the elements?
No, after numerous state of the art weathering and durability testing, the combination of both fibers does not sag, shrink or exhibit abnormal behavior when installed properly and subject to normal environmental conditions.
